Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Fuel Injectors

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Fuel injectors

See other generations:
Video tutorial

An electronic fuel injector consists of a nozzle, a valve, and a pump that exerts fuel pressure. When fuel injectors wear out or become clogged in a car, they no longer provide adequate fuel supply, causing the engine to lose RPM and resulting in the car not performing as it did before.

By doing it yourself, you can save on labor costs. To perform this task, you will need a socket wrench that matches the size of the injector.

Use the wrench to deactivate the fuel system by disconnecting the negative battery cable. You can then remove the electrical connector and the fuel intake line connected to the intake manifold.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

Replace Injectors on Mercedes A-Class
Replace Injectors on Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) How to remove the injectors from the Mercedes A-Class? Lift the hood and let's see the disassembly. Remove the engine soundproofing panel, disconnect…
Removing Injectors on Mercedes A-Class
Removing Injectors on Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) Let's see how to remove the injectors from the Mercedes A-Class. Lift the hood, and remove the engine soundproofing panel. After removing the electri…
How to Remove Diesel Injectors from the Mercedes A-Class
How to Remove Diesel Injectors from the Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) A common issue with this car model is the loss of seal on the injectors. With the engine running, open the hood and you may notice a mist of diesel f…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos