Do it yourself
Frequently asked questions about cars and motorcycles

Replace Injectors on Mercedes A-Class

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Fuel injectors

How to remove the injectors from the Mercedes A-Class? Lift the hood and let's see the disassembly. Remove the engine soundproofing panel, disconnect the electrical terminals connected to the car battery. After removing the electrical terminals (unbolt them), use the appropriate socket to remove the injectors: unbolt the injectors with a socket wrench and pull them out of the cylinder head. Take the new injectors and insert them into the engine cylinder head using the socket wrench. Finally, connect the power terminals and reinstall the plastic valve cover panel. Start the engine and test its operation.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe A (2004-2012 / W169) .. how to remove the injectors from the Mercedes A-Class. Lift the hood, and remove the engine soundproofing panel. After removing the electrical connectors.. …
Mercedes Classe A (1997-2004 / W168) A common issue with this car model is the loss of seal on the injectors. With the engine running, open the hood and you may notice a mist of diesel f…
Mercedes Classe A (1997-2004 / W168) Release the hood from the latch and lift it to secure it with the prop rod. Then locate the spark plugs, which are positioned under the engine's inta…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos