Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe C
  6. : How to disassemble the Mercedes C-Class steering wheel and airbag

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Steering wheel
Operation: How to disassemble the Mercedes C-Class steering wheel and airbag

Today we will see, in this video tutorial, how to disassemble and replace the steering wheel and its airbag on the Mercedes C-Class, in simple and quick steps. First we open the engine hood of our car and start to preventively disconnect our battery; then we get on board the car, driver's side, and start unscrewing the screws that we find behind the airbag, using a hex key, as shown in the video. Now disconnect the airbag electrical connector and unscrew the central screw of the steering wheel; let's remove it and replace it with the new one, applying the reverse procedure!


Posted on 8 May 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos