|
Do it yourself
| |||
| ||||
How to Remove and Replace the Passenger Airbag on the Mercedes C-Class W204
Model: Mercedes Classe C
W204
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
In this video, see how to remove and replace the passenger airbag on a Mercedes C-Class W204 that displays an error message on the dashboard: the first step is to turn off the ignition and disconnect the battery. Remove the trim from the A-pillar on the passenger side. Take off the retaining ring of the glove compartment to remove it; be careful if there is an AUX or USB port in the compartment. At the top of the glove compartment, there is an air duct that needs to be removed. On the top of the dashboard, identify the cover, open it, and disconnect the electrical connectors. Now, remove the center console, and then the climate control switch panel by disconnecting the electrical connectors. Remove the instrument panel trim and unscrew the screws holding the instrument cluster in place. In the center of the center console, there are two screws to remove (highlighted in the video), then one more above the dashboard, and one on the far right side; from underneath, unscrew the passenger airbag, and by slightly lifting the dashboard (which is free), you can extract it. Place the new module in position, screw it in, and reposition the ventilation duct on the console, then proceed to reassemble everything in reverse order.
Updated on 28 July 2026 by ScegliAuto
Related tutorials
Mercedes Classe C
(2007-2013 /
W204)
.. to replace the passenger airbag of a Mercedes C-Class W204 without needing to replace the dashboard. You must remove the glove compartment, which is.. …
Mercedes Classe C
(2007-2013 /
W204)
To disable the passenger airbag on a Mercedes C-Class, there is no procedure that can be performed from the vehicle's central control panel; the oper…
Mercedes Classe C
(2007-2013 /
W204)
To disable the passenger airbag on a Mercedes C-Class vehicle, use the ignition key. Open the passenger side glove compartment and insert the car's i…
Other guides you may be interested in
|
How to reset the tyre pressure warning light on the Kia Niro EV?
To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.072
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |