Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Cleaning Wheel Well Covers

Model: Mercedes Classe C W202 - Years 1993-2000
Part: Checks and maintenance

If the vehicle has been driven on snowy roads treated with salt or very dusty roads, it is likely that dirt has accumulated under the fender covers, which could cause damage to the body; therefore, it is recommended to remove the wheel well liner and eliminate any dirt residue present. Ideally, lift the vehicle on appropriate jack stands, remove both the wheel and the wheel well liner, and perform a thorough cleaning instead of just shifting the liner for a quick clean.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Fender on a Mercedes-Benz C-Class
How to Replace the Front Fender on a Mercedes-Benz C-Class
Mercedes Classe C (2000-2007 / W203) Follow these instructions to remove and replace the front fender on a Mercedes-Benz C-Class. First, open the hood of the vehicle and start by removin…
Removal of the Front Bumper
Removal of the Front Bumper
Mercedes Classe C (2000-2007 / W203) Start by removing the two bolts that secure the plastic cover under the front wheel using the appropriate wrench. Then, remove the clips and bolts th…
Throttle Body Cleaning Instructions
Throttle Body Cleaning Instructions
Mercedes Classe C (1993-2000 / W202) The throttle body is located at the entrance of the intake manifold and regulates the airflow entering the engine based on the accelerator pedal posi…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos