Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service light on the MG 3.

Model: MG 3 MK 2 - Years 2011-2024
Part: Service warning light

Below we will discover how to reset the service maintenance light for the regular oil change of the MG 3 gearbox. First, we get into the car and start pressing and holding the "ok" button located to the right of the steering wheel; then we turn on the instrument panel, waiting for the service mileage and maintenance key to be reset on the display, as shown in the video. At this point, we turn off the instrument panel and start the engine; all that's left is to verify the correct maintenance message reset on the instrument panel.

Posted on 7 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator of the MG 3
How to reset the service indicator of the MG 3
MG 3 (2011-2024 / MK 2) To manually reset the service indicator on the display of the instrument panel of your MG 3, you do not need a diagnostic tool. In fact, all you have…
How to reset the service in the MG MG3?
How to reset the service in the MG MG3?
MG 3 (2011-2024 / MK 2) In this tutorial we can see how to reset the service in the MG MG3, an extremely simple and fast operation, to be carried out only once all scheduled…
How to reset the service light on the MG MG3?
How to reset the service light on the MG MG3?
MG 3 (2024-2026 / MK 3) In this tutorial we can see how to reset the service in the MG MG3, an extremely simple and quick operation, to be carried out only once all schedule…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos