Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Fuel Door on an MG 3

Model: MG 3 MK 3 - Years 2024-2026
Part: Fuel cap

To open the fuel door on an MG 3, stop the vehicle and turn off the engine. From the driver's seat, locate the fuel door release lever, which is located at the bottom of the dashboard on the driver's side. Pull the lever towards you to unlock the fuel door, which is located on the rear left side of the body. Then, move outside the car and fully open the door. Slowly turn the fuel cap counterclockwise to remove it and proceed with refueling. Once finished, screw the cap back on clockwise until you hear it click shut. Finally, close the fuel door by pressing it towards the body until it locks securely in place.

Posted on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Locate the Fuses on an MG 3
How to Locate the Fuses on an MG 3
MG 3 (2011-2024 / MK 2) To locate the fuses on an MG 3, get inside the vehicle and find the internal fuse box located under the dashboard on the driver's side, usually near …
How to Replace the Cabin Air Filter on the MG 3
How to Replace the Cabin Air Filter on the MG 3
MG 3 (2011-2024 / MK 2) If you need to replace the cabin air filter on this vehicle, take a look at the video and the description below. Access the cabin from the passenger …
Where to Find the Fuse Box of the MG 3
Where to Find the Fuse Box of the MG 3
MG 3 (2011-2024 / MK 2) In this mini guide dedicated to your MG 3 (model years 2019-2023), discover the steps to locate the fuse box inside the vehicle on your own. First, t…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos