Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulbs in the MG 3?

Model: MG 3 MK 2 - Years 2011-2024
Part: Headlight bulb

As we can see in this tutorial, replacing the headlight bulbs in the MG 3 is an extremely quick and easy operation. First of all, make sure that the key is not inserted, in order to operate in complete safety, then open the bonnet and remove the large circular cap placed on the back of the headlight. Next, we extract the old light bulb by unlocking its clip, as shown in the video. Finally we disconnect the power connector, insert the spare part and reassemble everything following the reverse procedure. We avoid touching the new bulb directly with bare hands.

Posted on 24 May 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear light bulb on the MG 3?
How to replace the rear light bulb on the MG 3?
MG 3 (2011-2024 / MK 2) In order to replace the rear light bulb of the MG 3 you have to go to open the tailgate of the car, so that you go to loosen the two screws next to i…
How to replace the MG 3 headlight bulb
How to replace the MG 3 headlight bulb
MG 3 (2011-2024 / MK 2) If you want to replace the headlight bulb of your MG 3 (year 2011-2022), simply put into practice the instructions that you will find described below…
How to replace the MG 3 key battery
How to replace the MG 3 key battery
MG 3 (2011-2024 / MK 2) In order to correctly replace the key battery of your MG 3 Mk2 it only takes a few seconds. Just follow the instructions in the following mini guide.…

Other guides you may be interested in

How to Replace the Window Regulator on the BMW X3

Replacing the window regulator mechanism requires removing the door panel and the aluminum underpanel to access the mechanism itself. Remove the motor and loosen the glass retaining clips to complete the removal of the window regulator. Attach the motor to the new mechanism and insert the assembled unit back into the door, securing it with the appropriate nuts. Then, insert the glass and tighten the clips, completing the installation by connecting the motor's power connector and performing a functionality check before reassembling all other components.

Watch the video!


by ScegliAuto

More videos