Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. 3
    4. : How to change engine oil and oil filter on MG 3

MG 3 - Video tutorial

Model: MG 3 MK 2 - Years 2011-2023
Part: Engine oil
Operation: How to change engine oil and oil filter on MG 3

Let's see today the step-by-step instructions to be able to carry out the ordinary maintenance coupon, replacing the engine oil and the oil filter, of the MG 3. First we raise the car and start unscrewing the oil vent bolt that we find on the cup, making it drain in a container for about ten minutes; then we use the appropriate wrench to unscrew and remove the oil filter cartridge, replacing it with the new one (screwing it by hand and tightening gently). Now unscrew the filler cap and top up (using 10W40 oil).


Posted on 19 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos