Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box of the MG Hector located?

Model: MG Hector MK 1 - Years 2019-2026
Part: Fuse box

If you want to locate the fuse box inside your MG Hector on your own, just follow these simple steps. First, go inside the cabin and reach the driver's seat, then locate the small glove compartment located on the lower side of the dashboard and remove it with your hands. Once you have completed this simple operation, all you have to do is locate the car fuses and you're done. In order to work on them in case of electrical faults, don't forget to disconnect the vehicle's battery first.

Posted on 2 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin filter of the MG Hector.
How to replace the cabin filter of the MG Hector.
MG Hector (2019-2026 / MK 1) If you want to learn how to replace the cabin air filter in your MG Hector, then all you need to do is follow these steps. It's a procedure very simi…
How to reset the partial kilometers of the MG Hector
How to reset the partial kilometers of the MG Hector
MG Hector (2019-2026 / MK 1) Today's video will show us how to reset the trip or partial kilometers of the MG Hector, following the instructions below. First, we get into the car…
How to replace the MG Hector key battery
How to replace the MG Hector key battery
MG Hector (2019-2026 / MK 1) If your MG Hector's smart key has suddenly stopped working, it is most likely time to replace the battery inside. Let's find out how to do it togethe…

Other guides you may be interested in

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos