Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Colt
    4. : We disassemble the floating fuel pump on Mitsubishi Colt

Mitsubishi Colt - Video tutorial

Model: Mitsubishi Colt MK 1, Z30 - Years 2004-2012
Part: Fuel pump
Operation: We disassemble the floating fuel pump on Mitsubishi Colt

We disassemble the floating fuel pump on Mitsubishi Colt. To begin we disconnect the battery cables, then, we remove the rear seats of the car. We will find the wiring and a metal piece with screws, which we need to disassemble. Unscrew the tightening screws of the metal cap with a socket wrench, remove it from its seat. We wrap the entire perimeter of the sheet with absorbent paper or cloth (to absorb fuel leaks), then, with a socket wrench, unscrew the locking pins on the sides. Finally we disconnect the power supply terminals and the liquid circulation tubes.


Posted on 16 October 2023 by ScegliAuto

This video is currently unavailable

Other guides that may interest you

    Frequently Asked Questions

    • Colt 2004-2012 - Where is the inertia switch of the Mitsubishi Colt located? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos