Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Pajero
    4. : How to replace a cabin air filter on Mitsubishi Pajero Sport

Mitsubishi Pajero - Video tutorial

Model: Mitsubishi Pajero V80, MK 4 - Years 2006-2021
Part: Cabin air filter
Operation: How to replace a cabin air filter on Mitsubishi Pajero Sport

To replace the pollen air cabin filter in the Mitsubishi Pajero Sport, it is necessary, as for any maintenance operation, whether mechanical or not, to be carried out on a car, to place the car itself on a surface or on the deck in order to work on it. stable and safe way. Now, having done this, we need to locate the cabin air filter housing which, in this case, is located inside the car, behind the glovebox, located under the dashboard, on the passenger side. At this point, remove the hatch of the glove compartment after opening it and pressing on the sides of the hatch itself, from the outside to the inside. Below, remove the cover and unscrew the 3 screws (indicated, in the images, with the red arrows) that block access to the filter. Once this is done, we remove the old cabin air filter and replace it with the new one. Let's reassemble everything by proceeding to carry out, backwards, the operations seen. The cabin air filter should be replaced every year or at least every 15,000 km.


Posted on 15 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Pajero 1999-2006 - How many cabin filters does the Mitsubishi Pajero have? Read Answer
    • Pajero 1999-2006 - How many cabin filters does the Mitsubishi Pajero have? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos