Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Install Courtesy Light on Passenger Side

Model: Mitsubishi Lancer MK 9 - Years 2007-2020
Part: Accessory kit

Installing a courtesy light to help the passenger enter the vehicle at night can be a kind gesture. Obtain the kit with the LED light that should be positioned under the glove compartment to illuminate the floor. At this point, it is necessary to connect the power cables to the electrical system, specifically to the existing wires that power the other courtesy lights, ensuring that the light turns on when the door is opened. For this operation, identify the wires that power the other ceiling lights, which are located under the cover of the roof pillar. Once the correct wire is identified, connect one end of the light to this wire and the other to the vehicle's chassis using an existing screw.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Car Radio in a Mitsubishi Lancer?
How to Replace the Car Radio in a Mitsubishi Lancer?
Mitsubishi Lancer (2007-2020 / MK 9) In this tutorial, you will see how to replace the car radio in a Mitsubishi Lancer, a very simple and quick operation. Before proceeding, disconnect …
Bluetooth Hands-Free Kit Installation
Bluetooth Hands-Free Kit Installation
Mitsubishi Lancer (2007-2020 / MK 9) Many vehicles allow you to connect your mobile phone to the car radio via a wireless Bluetooth connection to use the speakers as a hands-free system.…
How to Reset the Tyre Warning Light on a Mitsubishi Lancer
How to Reset the Tyre Warning Light on a Mitsubishi Lancer
Mitsubishi Lancer (2007-2020 / MK 9) To reset the tyre warning light on a Mitsubishi Lancer, after checking the correct tyre pressure against the manufacturer's recommendation, turn on t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos