Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Bluetooth Hands-Free Kit Installation

Model: Mitsubishi Lancer MK 9 - Years 2007-2020
Part: Accessory kit

Many vehicles allow you to connect your mobile phone to the car radio via a wireless Bluetooth connection to use the speakers as a hands-free system. Remove the interior light under the ceiling and insert the hands-free microphone. Using a plastic tool to avoid damaging the bodywork, pry the side clips of the air conditioning vent panel to remove it and access the retaining screws of the car radio console. Remove the plastic frame around the car radio by prying at the edges. Unscrew the retaining screws of the console and completely remove it. Disconnect the necessary electrical wiring connectors to install the kit. Prepare the cables included in the Bluetooth kit, connecting them to the original connectors and the other end to the kit's control unit. Wire the kit according to the attached instructions and secure it inside the dashboard or on the passenger side. Refit the cover, passing the cables through the radio tunnel. Refit the air conditioning grille by reversing the previous steps. Turn on the car radio and check the proper functioning of all new features offered.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installation of LED Interior Lights
Installation of LED Interior Lights
Mitsubishi Lancer (2007-2020 / MK 9) Before proceeding with the installation of the LED bulbs, obtain a plastic spatula to detach the light fittings without damaging them; use the spatul…
Installation of Auxiliary Heater
Installation of Auxiliary Heater
Mitsubishi Lancer (2007-2020 / MK 9) The heater serves to warm the engine block to increase the vehicle's starting speed, as well as to heat the vehicle more quickly than it would normal…
Installation of LED Interior Lights
Installation of LED Interior Lights
Mitsubishi Lancer (2000-2006 / MK 8) Replacing the original incandescent bulbs with LED types will give the vehicle a much more modern and appealing look, as well as improve visibility. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos