Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Oil Change Light on Mitsubishi L200

Model: Mitsubishi L 200 MK 3 - Years 2015-2024
Part: Service warning light

After performing the engine oil change on your vehicle, it is also necessary to reset the maintenance light. In this tutorial, you will learn how to carry out this operation in a few simple steps on a third-generation Mitsubishi L200. Start by inserting the ignition key without turning on the ignition. Then, press the button on the right side of the steering wheel to activate the information display and continue pressing it until you reach the screen showing the miles and months for the maintenance interval. Next, press and hold the previous button until the spanner icon starts to flash. Finally, release it and press it again to execute the reset.

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Fuse Box on the Mitsubishi L200?
Where is the Fuse Box on the Mitsubishi L200?
Mitsubishi L 200 (2015-2024 / MK 3) In this new mini guide dedicated to your Mitsubishi L200 Mk3 (2020-2023), we will discover where the fuse box is located and how to access the fuses …
When to Replace the Timing Belt on the Mitsubishi L200 2.5 TD?
When to Replace the Timing Belt on the Mitsubishi L200 2.5 TD?
Mitsubishi L 200 (2005-2015 / MK 2) In this brief guide, you will discover when to replace the timing belt on the Mitsubishi L200 2.5 Turbo Diesel, following the instructions below. The…
Where is the OBD port of the Mitsubishi L200 located?
Where is the OBD port of the Mitsubishi L200 located?
Mitsubishi L 200 (2005-2015 / MK 2) If you own a Mitsubishi L200 and want to find out where the OBD port is located, all you have to do is follow these steps. First, park the car on a f…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos