Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the power steering pump of the Nissan Interstar

Model: Nissan Interstar MK 1 - Years 1998-2011
Part: Pump

Today we will see the main instructions and the procedure for disassembling and replacing the hydraulic power steering pump of the Nissan Interstar, in simple steps. First, open the vehicle's engine hood and start by disconnecting the V-belt from the power steering pump, then disconnect all the hydraulic lines; then unscrew the fixing screws of the power steering pump, in order to remove it, as shown in the video. At this point, install the new hydraulic power steering pump, connecting it and finally topping up the appropriate oil.

Posted on 13 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the timing belt of the Nissan Interstar?
How do you replace the timing belt of the Nissan Interstar?
Nissan Interstar (1998-2011 / MK 1) It will be possible to replace the timing belt of the Nissan Interstar by lifting the vehicle, so that the corresponding front wheel is not in contac…
Service reset on a Nissan Interstar
Service reset on a Nissan Interstar
Nissan Interstar (1998-2011 / MK 1) Through this very short video tutorial today you will be able to see the entire procedure necessary in a few simple steps to reset the service light …
How do you reset the service light on the Nissan Interstar?
How do you reset the service light on the Nissan Interstar?
Nissan Interstar (1998-2011 / MK 1) The commercial vehicle Nissan Interstar, of which we can see a brief presentation in the video uploaded here, is equipped with the well-known Service…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos