Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install an Android radio in a Nissan Juke MK1

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Car stereo

See other generations:
Video tutorial

In this video, we can see how to install an Android car radio in a Nissan Juke MK1: we start by prying off the part containing the air knobs and removing the connectors located at the back; then, using our plastic tool, we will also remove the frame around the air vents.

We will also disconnect the electrical connectors here, and then, with the help of a screwdriver, we will remove the four screws located on the sides of the screen.

There are also connectors to be removed here, along with the reception antenna. We will take the vents out of the frame so that we can install the new screen; we will put the vents back in and then reassemble the entire unit in its place.

We will need to reconnect the connectors and the antenna, and then we will put the air conditioning knobs back in place.


Posted on 25 December 2025 by ScegliAuto


Related tutorials

How to Reset the Radio in a Nissan Juke?
How to Reset the Radio in a Nissan Juke?
Nissan Juke (2010-2019 / MK 1) The video demonstrates how to reset the radio in a Nissan Juke. This model featured in the video has a basic radio without a touchscreen, and it may …
Dismantling the Nissan Juke Radio
Dismantling the Nissan Juke Radio
Nissan Juke (2010-2019 / MK 1) Today, you will learn how to dismantle the radio of a Nissan Juke in simple steps. First, get inside the car and remove the plastic trim around the r…
How to Replace the Radio in a Nissan Juke?
How to Replace the Radio in a Nissan Juke?
Nissan Juke (2010-2019 / MK 1) To replace the radio in a Nissan Juke, use a tool to pry off the cover from the lower part of the radio, which surrounds the climate control buttons.…

Other guides you may be interested in

    Frequently Asked Questions

    • Juke 2010-2019 - How can I retrieve the "pin code" of the car radio of my Nissan Juke? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos