Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the transmission oil of the Nissan Qashqai.

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Transmission fluid

See other generations:
Video tutorial

On your Nissan Qashqai, changing the transmission oil requires access to the service point in the engine compartment, near the battery, where you will find the tube with the cap/dipstick dedicated to the transmission circuit. With the engine off, clean the area around the cap thoroughly to prevent dirt and debris from entering the conduit.

Release any safety latch if present and carefully pull out the cap/dipstick while keeping it aligned. From this point, perform the necessary procedures for the transmission oil, such as checking and managing the level or refilling after draining according to the procedure (depending on the type of transmission).

Once finished, reinsert the cap/dipstick until it is fully seated and restore the latch, ensuring that it is properly secured and that the opening remains clean and well-sealed.


Posted on 27 December 2025 by ScegliAuto


Related tutorials

How to Change Gear Oil on a Nissan Qashqai
How to Change Gear Oil on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) In this video tutorial, see how to change the gear oil on a Nissan Qashqai. The oil change is generally performed between 56,000 and 62,000 miles. Ch…
How to change the engine oil in a Nissan Qashqai 1?
How to change the engine oil in a Nissan Qashqai 1?
Nissan Qashqai (2006-2014 / J10) The first step when changing the engine oil in a car is to unscrew the filler cap so that the used oil drains out more easily. After doing this, lift…
How to Replace the Reverse Switch on a Nissan Qashqai J10
How to Replace the Reverse Switch on a Nissan Qashqai J10
Nissan Qashqai (2006-2014 / J10) On this Nissan Qashqai J10, the reverse sensor has stopped working. The symptoms are clear: no rear lights, the camera does not activate, and nothing…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos