Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Spark Plugs and Ignition Coils on a Nissan NV200

Model: Nissan Nv200 MK 1 - Years 2009-2024
Part: Spark plugs

Let's see how to change the spark plugs and ignition coils on a Nissan NV200: you can find a complete kit consisting of 4 coils and 4 spark plugs on eBay with code 405637374093 for £274.63 with free delivery. Disconnect the negative battery cable, remove the air intake pipe to free up space, and disconnect the electrical connectors and pipes from the throttle body. Now remove the intake manifold; disconnect the PCV valve pipe; locate and unscrew the two 12 mm bolts at the rear of the manifold; unscrew all the 10 mm bolts securing the manifold to the cylinder head. Lift the manifold and remove it: you may need to disconnect one last pipe at the rear. You now have clear access to the coils: disconnect the electrical connector from each coil, unscrew the fixing screws, and extract them. Using a long spark plug socket, unscrew and remove the old spark plugs. Install the new spark plugs, tightening them to the correct torque, and then fit the new coils, connecting them to the cables. For reassembly, clean the contact surfaces between the manifold and the cylinder head; fit a new gasket on the intake manifold, and tighten all bolts in a cross sequence. Reconnect all pipes and connectors, refit the air intake pipe, and reconnect the negative battery cable.

Posted on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Nv200 (2009-2024 / MK 1) To locate the OBD port inside your Nissan NV200, carefully follow these simple instructions. First, park your Nissan NV200 safely and ensure it is co…
Nissan Nv200 (2009-2024 / MK 1) In this tutorial, learn how to set the time in the Nissan NV200 van, a very simple and quick operation to perform after disconnecting the battery or …
Nissan Nv200 (2009-2024 / MK 1) Following these simple steps, we will see how to reset the service light for the regular maintenance of the engine oil change in the Nissan NV200. Fi…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos