Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Door Lock Actuator on the Nissan Altima

Model: Nissan Altima L33 - Years 2013-2018
Part: Door lock

Let's see how to remove the door lock actuator on the Nissan Altima: remove the cover of the inner handle and then the window switch panel, disconnecting the electrical connectors. There are usually Phillips screws under the armrest and behind the handle cover; pull the panel outward with firm force, starting from the bottom edge. Disconnect the window, mirror, and speaker connectors. Lift the plastic protective sheet (without tearing it; you will reinstall it at the end). Remove the window bracket and disconnect the door actuator: it may be necessary to tilt it to get it out. You can find the part on AliExpress with code 1005010658349889 for €51.69, with free shipping. Install it by snapping the rods into place, re-screw the bolts, and reconnect the electrical connector. Reinstall the window bracket and then reassemble all other pieces in reverse order: protective sheet, panel connectors, door panel, switch panel. Perform a lock/unlock test, and you're done.

Posted on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Altima (2013-2018 / L33) Discover, in this brief and simple guide, how to remove and replace the sun visor on a Nissan Altima by following the instructions below. First, get …
Nissan Altima (2013-2018 / L33) To manually reset the maintenance light on your 2015 Nissan Altima, you must follow the procedure described in this new guide. First, turn on the ins…
Nissan Altima (2002-2006 / L31) If you haven't been able to locate the box that contains all the various fuses in your 2004 Nissan Altima, don't worry because below we will provide …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos