Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil and Filter in a Nissan Qashqai?

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Engine oil

To replace the engine oil and filter in a Nissan Qashqai, position the vehicle on a flat surface and safely lift it to access the underside of the engine. Place a container under the oil sump, remove the filler cap in the engine bay, and unscrew the drain plug located under the sump. Allow the used oil to drain completely, then refit the drain plug, checking the condition of the gasket. Locate the oil filter, unscrew it with an appropriate tool, and remove it from its seat. Apply a thin layer of clean oil to the gasket of the new filter and screw it in until properly tightened. Pour the new engine oil through the filler neck, check the level with the dipstick, and add more if necessary. Start the engine for a few seconds, turn it off, and check the level again, ensuring there are no leaks from the filter or drain plug.

Posted on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Qashqai (2014-2022 / J11) To change the engine oil and filter in a Nissan Qashqai, warm up the engine for a few minutes, then turn it off and lift the vehicle. Place a contain…
Nissan Qashqai (2021-2026 / J12) In this guide for your Nissan Qashqai J12 (2021-2023), discover how to quickly and safely replace the oil filter. Before you start, ensure the car is…
Nissan Qashqai (2014-2022 / J11) Today we will discover the instructions that will help us in the process of replacing the engine oil and oil filter, performing the routine maintenan…

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2006-2014 - What is the right amount of engine oil for the Nissan Qashqai 1.6 dci? Read answer
    • Qashqai 2014-2022 - Where is the oil dipstick of the Nissan Qashqai located? Read answer
    • Qashqai 2014-2022 - Where is the Nissan Qashqai 1.5 dCi engine oil dipstick located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos