Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Brake Pads and Discs

Model: Nissan Primera MK 3 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Brake rotors

Video tutorial

This guide shows how to independently replace the brake pads on your car. The pads play an important role as they are used to brake the brake disc attached to the wheel. It is important to replace them because worn pads have a lower contact surface with the disc, which reduces braking quality.

The first step is to put the car on a support. Then, push the piston of the brake cylinder.

To remove a brake caliper, you need to remove the clips and springs to extract the brake pads from the caliper.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

How to replace the air filter of the Nissan Primera
How to replace the air filter of the Nissan Primera
Nissan Primera (2002-2008 / MK 3) These short and simple steps will show us how to disassemble and replace the air filter of the Nissan Primera engine. First, we open the hood of the …
How to replace the spark plugs of the Nissan Primera 1.8L
How to replace the spark plugs of the Nissan Primera 1.8L
Nissan Primera (2002-2008 / MK 3) Today we will see the main instructions that will allow us to disassemble and replace the spark plugs of the Nissan Primera 1.8L engine. First of all…
Clutch Replacement Instructions
Clutch Replacement Instructions
Nissan Primera (2002-2008 / MK 3) To replace the clutch, you need a good understanding of general mechanics as well as some basic tools: ideally, lift the vehicle on a ramp rather tha…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos