Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Air Filter Replacement

Model: Nissan Primera MK 3 - Years 2002-2008
Part: Cabin air filter

The cabin air filter is located on the passenger side behind the glove compartment: you will need to remove the glove compartment to access the filter housing; once the cover is removed, extract the old filter, clean out any debris, and insert the new filter, ensuring the airflow direction is correct. After replacing the filter, it is recommended to sanitise the cabin using a bactericidal spray inside the air vents with the air conditioning on, ventilation at maximum speed, and recirculation activated.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the Nissan Primera
How to replace the air filter of the Nissan Primera
Nissan Primera (2002-2008 / MK 3) These short and simple steps will show us how to disassemble and replace the air filter of the Nissan Primera engine. First, we open the hood of the …
Replacing the Engine Air Filter
Replacing the Engine Air Filter
Nissan Primera (2002-2008 / MK 3) The engine air filter is located at the front left of the engine bay (when viewed from the front); to replace it, simply unclip the securing hooks of…
How to replace the air filter in the Nissan Primera?
How to replace the air filter in the Nissan Primera?
Nissan Primera (2002-2008 / MK 3) In this tutorial, we will see how to replace the air filter in the Nissan Primera, a very simple and quick operation. First of all, let's make sure t…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos