Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the spark plugs of the Nissan Rogue.

Model: Nissan Rogue T32 - Years 2014-2020
Part: Spark plugs

Today's guide will show us how to disassemble and replace the engine spark plugs of the Nissan Rogue. First, we open the engine hood and begin to detach and remove the intake manifold located on the top of the engine. Then, we disconnect the electrical connectors of the spark plugs and unscrew the fixing screws of the ignition coils, as shown in the video. At this point, we use a socket wrench with an extension to unscrew and remove the spark plugs. We then replace them with new ones of the same type and pitch, screwing them in by hand and tightening them gently with a wrench.

Posted on 13 June 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the spark plugs on the Nissan Rogue?
How do you replace the spark plugs on the Nissan Rogue?
Nissan Rogue (2014-2020 / T32) In order to replace the spark plugs on the Nissan Rogue, you need to open the hood so that you can access the components in the lower part of the eng…
How to replace spark plugs on Nissan Rogue 1
How to replace spark plugs on Nissan Rogue 1
Nissan Rogue (2008-2015 / S35) Let's see in this short and simple guide how to replace the spark plugs of the Nissan Rogue first series engine. First of all we open the bonnet and …
How do you set the clock on the Nissan Rogue?
How do you set the clock on the Nissan Rogue?
Nissan Rogue (2014-2020 / T32) It will be possible to adjust the clock of the Nissan Rogue by first turning on the instrument panel, inserting the ignition key into the correspondi…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos