Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to dismantle the dashboard of the Nissan Terrano

Model: Nissan Nissan Various
Part: Dashboard

In this guide, we will see the useful instructions for disassembling the entire dashboard of the Nissan Terrano. First, we get into the vehicle and start by removing the central instrumentation, as well as the car radio and air conditioning controls. To do this, we unscrew the fixing screws that we find on the sides, disconnecting the electrical connectors to remove them, as shown in the video. At this point, we remove the steering wheel and its airbag, subsequently dismantling the glove compartment as well. Once the dashboard is exposed, we can detach and remove it, following the video tutorial until the end!

Posted on 15 September 2023 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuse boxes of the Nissan March located?
Where are the fuse boxes of the Nissan March located?
Nissan Nissan Various In this video we can see the arrangement of the fuse boxes of the Nissan March k12. This car is the right-hand drive version of the Nissan Micra, so …
Where is the cabin fuse box located in the Nissan Maxima?
Where is the cabin fuse box located in the Nissan Maxima?
Nissan Nissan Various If you want to locate the fuse box in the cabin of your Nissan Maxima by yourself, you just need to read the following guide and follow all the steps…
How to enter the radio unlock code in a Nissan?
How to enter the radio unlock code in a Nissan?
Nissan Nissan Various In this tutorial, we can see how to enter the radio unlock code in a Nissan, a very simple and quick operation to be carried out, for example, after …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos