Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the water pump on an Opel Corsa E

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Pump

In this short video, we see an indication on how to change the water pump, which is located on the left side of the engine block, and is connected to the serpentine belt. We can find the replacement pump, for example, on auto-doc. It has the code 1260W0021 and costs 35.65 + 9.90 euros for delivery. When performing this operation, it is also necessary to replace the serpentine belt and the tensioner bearing. The YouTuber explains in detail how to first drain the hydraulic system and then refill it to ensure a perfectly clean job. There is enough space in the engine area to perform the entire operation without lifting the vehicle.

Posted on 24 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Water Pump on Opel Corsa
Replacing the Water Pump on Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Replace the water pump on the Opel Corsa. Remove the pump from inside the engine bay. Lift the front bonnet of the car to access the pump. Disconnect…
How to replace the water pump of the Opel Corsa 1.2
How to replace the water pump of the Opel Corsa 1.2
Vauxhall Corsa (2006-2014 / Corsa D) Today's main steps will show us the process of disassembling and replacing the water pump of the Opel Corsa 1.2. First, we open the hood of the car a…
Replacement of the water pump on an Opel Corsa
Replacement of the water pump on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Today we will see how to replace the water pump on an Opel Corsa D 1.2 16v. Let's start the operation by removing the air filter box and disconnectin…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos