Do it yourself
Frequently asked questions about cars and motorcycles

Localization and diagram of the fuse boxes of the Vectra B.

Model: Vauxhall Vectra Vectra B, MK 2 - Years 1995-2002
Part: Fuse box

In this video we can see the location and diagram of the fuse boxes of the Opel Vectra version B: we find one under the left side of the dashboard, near the brake pedal. To access it, it is necessary to remove the plastic panel (attached with clips, so to remove them you need to use a flathead screwdriver) and then rotate the release lever to open the cover. It contains fuses from 5A to 30A: the complete legend is printed on the cover; and the main relays such as ignition, headlights, air conditioning. The secondary fuse box is in the engine compartment, near the battery and covered by a black cover. It contains high amperage fuses (from 30A to 80A) for the radiator fan, ABS, fuel pump and alternator. There are also hidden fuses: the radio backup fuse (which is behind the radio); the OBD diagnostic port fuse which is located under the steering wheel.

Posted on 5 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Vectra (2002-2008 / Vectra C, MK 3) This section covers the location and diagram of the fuse boxes for the third and final generation of the Opel/Vauxhall Vectra C: the fuse box located…
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) In this video, we see the placement of the fuse boxes of the Opel/Vauxhall Vecta C, with particular attention to the location of the boxes on the rig…
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) In this brief and simple guide, follow the instructions to remove and replace the rear seats of the Opel Vectra. First, open the rear doors and start…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos