Do it yourself
Frequently asked questions about cars and motorcycles

Activate and deactivate the start & stop on the Opel Grandland-X

Model: Vauxhall Grandland X MK 1 - Years 2017-2024
Part: Onboard computer

Let's see how to activate and deactivate the Start & Stop function on the Opel Grandland-X: on the dashboard there is a dedicated button with the icon of an "A" surrounded by an arrow. With the light on, the system is deactivated; with the light off, the system is active and ready to intervene when conditions allow. The start and stop does not activate (even if on) when seat belts are not fastened, when the vehicle is on a steep slope, when the air conditioning or heating is set to extreme temperatures, when the battery is starting to run low, when the engine is not at operating temperature, when the steering wheel is turned to the maximum (for example during a maneuver). The system is designed for fuel savings and emissions reduction; if manually deactivated, it remains so until the next engine shutdown.

Posted on 19 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Grandland X (2017-2024 / MK 1) The fuses of the Opel Grandland X are located inside the designated fuse boxes installed in the vehicle: in this model, there are two fuse boxes. The…
Vauxhall Grandland X (2017-2024 / MK 1) Resetting the service message on your Opel Grandland X is a very simple operation. Turn on the instrument panel by turning the key to position 1 or p…
Vauxhall Grandland X (2017-2024 / MK 1) Before you begin, ensure that the service has been carried out. Next, sit in the driver's seat of your Opel Grandland X. Start by pressing the start …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos