Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Spark Plugs on an Opel Ampera

Model: Vauxhall Opel Various
Part: Spark plugs

Replacing the spark plugs on an Opel Ampera (or Chevrolet Volt) is a feasible operation but requires attention to critical details due to its compact petrol engine, which must only be handled when cold. Additionally, the high-voltage system must always be disconnected; this is the most important step! Open the boot and lift the floor, find the orange disconnect button for the high-voltage battery pack and press it at least 5 minutes before proceeding, to allow the capacitors to discharge. The spark plugs are specific, with a longer thread than traditional cars, and the torque must be exact. The ignition coils are arranged in line on the cylinder head; press the locking lever and pull the orange clip, remove the fixing screw, take the coil out of its well, and before extracting the coil, clean all dirt around its base, remove the spark plug, place the new one in its place and tighten it with a torque wrench to 20 Nm. Repeat for all cylinders, then reinsert the coils and tighten with the screws; reconnect the 12V battery and then the HV battery, refit the covers and restart the engine to check that everything is in order.

Posted on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Opel Various In this tutorial, you will see how to replace the remote cover of an Opel, a very simple and quick operation. For this, you will need a flathead scre…
Vauxhall Opel Various Let's see what the ESC error means on Opel/Vauxhall vehicles and the actions to take: it indicates a fault in the electronic stability control. Since…
Vauxhall Opel Various In today's video, learn how to replace the remote battery in Opel cars from the mid-2000s. First, remove the rear cover, using a flathead screwdriver…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos