Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What Does the Message "Vauxhall/Opel Vehicle Maintenance Due Soon" Indicate?

Model: Vauxhall Insigna MK 2, Insigna B - Years 2017-2026
Part: Warning light – error code

The message "Service Vehicle Soon" does not necessarily indicate that the car needs a service. In fact, it can mean almost any electrical or mechanical problem. In most cases, on these models, the culprit is one of two components: the glow plugs or the mass air flow (MAF) sensor. To diagnose, connect a diagnostic scanner and read the error codes. In the video, code P0672 indicated a malfunction of the glow plug in cylinder 2. The system is equipped with special glow plugs that have an integrated compression sensor, allowing monitoring of the combustion pressure in each cylinder. In this case, for the repair, remove the engine cover, warm up the engine, and spray WD40 around the glow plugs. Using a 12 mm socket and an extension, unscrew the faulty glow plug. Insert the new glow plug and tighten to 5 Nm. Reconnect the connector and clear the code with the scanner. If the message returns, also check the MAF sensor.

Posted on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

What to do when you receive the message "vehicle maintenance soon" on an Opel/Vauxhall car
What to do when you receive the message "vehicle maintenance soon" on an Opel/Vauxhall car
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) When the message "vehicle maintenance due soon" appears on the instrument panel of our Opel/Vauxhall Insignia, the onboard system has simply detected…
What does error code 55 indicate on the Opel Insignia?
What does error code 55 indicate on the Opel Insignia?
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) Error code 55 for the Opel Insignia indicates that it is necessary to perform a regeneration of the particulate filter. Regeneration is usually done …
How to Reset the Service Light on the Opel Insignia
How to Reset the Service Light on the Opel Insignia
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) In today's video, you will learn how to reset the service light on the Opel Insignia. First, turn on the car's instrument panel. Enter the selection …

Other guides you may be interested in

    Frequently Asked Questions

    • Insigna 2008-2017 - What does the code 20 indicate, in the Opel Insignia? Read answer
    • Insigna 2017-2026 - What does the code 24 error message on Opel Insignia mean? Read answer
    • Insigna 2008-2017 - What does code 89 mean in the Opel Insignia? Read answer
    • Insigna 2008-2017 - What does code 3 mean and how to reset it in the Opel Insignia? Read answer
    • Insigna 2017-2026 - What does the "code 35" error mean in the Opel Insignia? Read answer
    • Insigna 2017-2026 - What does the error code 18 mean on the Opel Insignia? Read answer
    • Insigna 2008-2017 - What does the code 82 of the Vauxhall Insignia mean? Read answer
    • Insigna 2017-2026 - What does the code 79 of the Opel Insignia mean? Read answer
    • Insigna 2008-2017 - What does "Code 59" mean on an Opel Insignia? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos