Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Spark Plugs on Opel Insignia

Model: Vauxhall Insigna Insigna A, MK 1 - Years 2008-2017
Part: Spark plugs

Replacing the spark plugs on an Opel Insignia? Remove the spark plugs from the engine bay. Take off the cover above the engine soundproofing panel, then remove the coils from the cylinder head using a screwdriver or pliers (unscrew the screws on top of the coil bar). Remove the coil bar from the cylinder head. Next, use a socket to unscrew the spark plugs and pull them out of the cylinder head. Take the new spark plugs and guide them into the cylinder head with the socket extension, then tighten them. Refit the coil bar and the cover at the end of the assembly.

Updated on 27 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Glow Plugs on the Opel Insignia 1.6 CDTi MK1
Replacing the Glow Plugs on the Opel Insignia 1.6 CDTi MK1
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) In this video, follow the instructions to remove and replace the glow plugs on the first series Opel Insignia, with a 1.6 CDTi Ecotec engine. First, …
How to Replace the Remote Battery of the Opel Insignia?
How to Replace the Remote Battery of the Opel Insignia?
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) To replace the battery of the Opel Insignia remote, press the button at the top of the device to lift the key. Once lifted, pry inside its housing to…
How to Change the Key Battery of an Opel Insignia
How to Change the Key Battery of an Opel Insignia
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) Replacing the battery inside your Opel Insignia A key is a very simple operation, and below is a description of the steps you need to follow to compl…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos