Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Fuel Pump from Opel Vectra 1.6 16V

Model: Vauxhall Vectra Vectra B, MK 2 - Years 1995-2002
Part: Fuel pump

In this tutorial, you will learn how to remove the fuel pump from an Opel Vectra 1.6 16 valve. First, access the rear of the car and remove the carpet covering the pump; then take off the plastic cover by prying it with a sharp object. At this point, disconnect the electrical connector of the pump by gently pressing the tab, and disconnect the two fuel hoses by removing the clips. Now, unscrew the pump collar and extract it: then replace it with the new one!

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fuel Pump on an Opel Vectra C
How to Remove the Fuel Pump on an Opel Vectra C
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) This simple guide shows you how to remove the low-pressure fuel pump or the fuel sender unit on an Opel Vectra C, second series. First, open the rear…
Replacement of the timing belt of the Opel Vectra 1.8 16V
Replacement of the timing belt of the Opel Vectra 1.8 16V
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) Today's main instructions will show us how to disassemble and replace the timing belt on the Opel Vectra 1.8 16V, with engine code Z18XE. First, we o…
Removing the Fuel Pump on the Opel Vectra C
Removing the Fuel Pump on the Opel Vectra C
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) In today's tutorial video, you will learn how to remove and replace the fuel pump or fuel sender on the Opel Vectra C, third series, by following the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos