Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Rocker Arm Shaft

Model: Vauxhall Astra Astra G - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Engine

See other generations:
Video tutorial

The operation of the valves in this type of engine is performed through rockers controlled by the camshaft and fixed onto pillars (which resemble the columns of a castle, hence the name "rocker arm shaft") that end with a spherical head; once the cylinder head gasket has been replaced and the cylinder head installed, insert the well-lubricated pillars and rockers; then insert the camshaft into its support, secure it with the appropriate side flange, and insert the oil seal; apply gasket sealant and place the camshaft with its support, tightening the respective fixing pins that also secure the cylinder head to the block.

Finally, install the toothed pulley, align the timing marks, and insert the timing belt.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Cylinder Head Resurfacing and Engine Gasket Kit Replacement
Cylinder Head Resurfacing and Engine Gasket Kit Replacement
Vauxhall Astra (1998-2006 / Astra G) After resurfacing the cylinder head, check the flatness of the surface using a straight edge and a feeler gauge; replace the valve guide seals using …
Guide to replacing the timing belt of the Opel Astra 2.0 CDTi
Guide to replacing the timing belt of the Opel Astra 2.0 CDTi
Vauxhall Astra (2009-2016 / Astra J) In this guide, we will see information regarding the disassembly and replacement of the timing belt of the Opel Astra 2.0 CDTi. On this type of engin…
How to Replace the Rear Light Bulb on an Opel Astra J?
How to Replace the Rear Light Bulb on an Opel Astra J?
Vauxhall Astra (2009-2016 / Astra J) To replace the rear light bulb on the Opel Astra, open the tailgate to detach the inner side panel of the boot corresponding to the bulb that needs r…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos