Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Astra
    4. : How to disassemble the turbine of the Opel Astra 1.9 CDTI

Vauxhall Astra - Video tutorial

Model: Vauxhall Astra Astra H - Years 2004-2010
Part: Turbine
Operation: How to disassemble the turbine of the Opel Astra 1.9 CDTI

We see in this guide the main instructions that will allow us to disassemble and replace the turbine of the Opel Astra 1.9 CDTI engine. First we open the bonnet of our car and begin to disassemble and remove the front bumper, unscrewing all the fixing screws; then we are going to disassemble the engine intake sleeve, connected to the air filter box, as shown in the video. At this point we unscrew the fixing screws of the turbine, disconnecting it from the exhaust manifold; we remove and replace the entire turbine, following the video tutorial to the end!


Posted on 6 September 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Astra 2015-2022 - What is the cost to replace the turbocharger in the Opel Astra 1.7 CDTi? Read Answer
    • Astra 2004-2010 - How much does it cost to replace the turbine in the Opel Astra 1.7 CDTi? Read Answer
    • Astra 2009-2016 - How to recognize problems with the turbine of the Opel Astra 1.7 CDTI? Read Answer
    • Astra 2009-2016 - Where is the turbine located in the Opel Astra? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos