Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter of the 2020 Opel Vivaro.

Model: Vauxhall Vivaro MK 3, Vivaro C - Years 2019-2026
Part: Cabin air filter

If you own an Opel Vivaro Mk3 (year 2020) and want to replace the cabin air filter yourself, all you have to do is carefully read the following guide and put into practice what is described. First, reach the passenger seat and focus your attention on the lower part of the glove compartment, specifically on the left side. Then, locate the box containing the air filter and remove the protective cover. Finally, remove the old filter and insert the new one. Reattach the cover and you're done.

Posted on 4 June 2023 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) On the Opel Vivaro, the fuses are all contained within two fuse boxes that are installed in the vehicle: these are located inside the cabin and insid…
How do you reset the pollution control system warning light on the Opel Vivaro?
How do you reset the pollution control system warning light on the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) In order to reset the anti-pollution system light of the Opel Vivaro, you need to connect a diagnostic tool to the OBD port of the vehicle: this can …
How to replace the battery of the Opel Vivaro remote control.
How to replace the battery of the Opel Vivaro remote control.
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) Through these short and simple instructions, we will see how to disassemble and replace the battery of the key remote for the Opel Vivaro. First, tak…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos