|
Do it yourself
| |||
| ||||
Replacing the rocker cover gasket on the Opel Meriva
Model: Vauxhall Meriva
Meriva A, MK 1
- Years 2003-2010
Let's see how to fix the engine oil leak from the rocker cover gasket. Start by removing the engine cover, and you will see oil everywhere underneath. It is essential that the engine is cold; otherwise, you could seriously burn yourself. Remove all the bolts from the lower cover, and you will see that the gasket is cracked. Clean everything thoroughly, both the cover and the engine, from all oil residues, so the new gasket can fit perfectly. Apply high-temperature silicone in the corners, refit the cover with the gasket, without overtightening the nuts. Be careful with the side bolt where the earth wire is connected. Refit the rocker arms, ensuring the connector is positioned correctly. Refit the screws: wait about half an hour for the silicone to set, then you can also refit the cover. Job done.
Updated on 25 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Vauxhall Meriva
(2003-2010 /
Meriva A, MK 1)
Replacing the key battery on an Opel Meriva A is really simple, and now you will see how. Insert a small flat-head screwdriver into the rear slot of …
Vauxhall Meriva
(2010-2017 /
MK 2, Meriva B)
To replace the headlight bulb on the Opel Meriva, open the bonnet to access the components inside the engine compartment. Inside the headlight, you w…
Vauxhall Meriva
(2003-2010 /
Meriva A, MK 1)
If you own a first edition Opel Meriva (year 2008) and want to easily locate the OBD port, all you have to do is follow the steps described below. Fi…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open the Bonnet on the Lancia Y
To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.096
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |