Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gasket on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Accessory kit

After releasing the bonnet from the appropriate lever and holding it with the support rod, you can start removing all the pipes and cables from the top of the engine to also remove the cylinder head cover. Next, you will need to remove some parts of the fluid circulation. Place a support under the engine as you will need to remove some engine mounts. To remove the last bolts securing the cylinder head, you may also need to remove the water pump. Now you can lift the cylinder head and access the cylinders where the gasket needs to be replaced. Carry out the replacement and retrace the steps in reverse for reassembling the various components.

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the head gasket of the Peugeot 206 1.4
Guide to replacing the head gasket of the Peugeot 206 1.4
Peugeot 206 (1998-2012 / MK 1) Today's guide will show us the main steps useful for disassembling and replacing the cylinder head gasket of the Peugeot 206 1.4. Firstly, we open th…
How to Replace the Head Gasket on the Peugeot 206?
How to Replace the Head Gasket on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) The procedure for replacing the head gasket on the Peugeot 206 involves loosening the screws that secure the coils and spark plugs at the top of the …
How do you replace the head gasket of the Peugeot 206?
How do you replace the head gasket of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In order to replace the head gasket of the Peugeot 206, you need to open the hood so that you have access to the components located inside the engine…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos