Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Filter on the Peugeot 308 T7

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Air filter

See other generations:
Video tutorial

Among the tasks to perform during a service is the replacement of the engine air filter, necessary to ensure that clean air flows to the fuel system. To carry out this operation, open the bonnet of the Peugeot 308, unscrew the two screws holding the brake fluid reservoir and move it aside.

Loosen the air hose clamp, and using a Torx 25 spanner, unscrew the three screws securing the filter box cover. Lift it off and remove the old filter.

Insert the new filter element, close the cover and secure it with the screws, tighten the clamp, and return the brake fluid reservoir to its position.


Updated on 31 October 2026 by ScegliAuto


Related tutorials

Replacing the Air Filter on a Peugeot 308 MK2
Replacing the Air Filter on a Peugeot 308 MK2
Peugeot 308 (2013-2021 / T9, MK 2) One of the tasks included in the maintenance service for the Peugeot 308 MK2 is replacing the air filter mounted on the intake circuit. To do this, o…
Replacing the Cabin Air Filter on the Peugeot 308
Replacing the Cabin Air Filter on the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) To ensure a constant flow of clean air inside the Peugeot 308 cabin, you must replace the specific filter at the scheduled intervals in the maintenan…
Where is the Air Filter Located on the Peugeot 308 and How to Replace It?
Where is the Air Filter Located on the Peugeot 308 and How to Replace It?
Peugeot 308 (2013-2021 / T9, MK 2) The air filter on the Peugeot 308 model 2 is located inside the front bonnet, under the windscreen. If necessary, replacing the filter is a very simp…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos