Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the fuel filter in the Peugeot 508?

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Diesel fuel filter

In this tutorial we can see how to replace the fuel filter in the Peugeot 508, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then open the hood and locate the filter in question, located on the right side of the engine itself. Next, disconnect the various tubes indicated using a flat-tip screwdriver, also disconnect the sensor connector and unscrew the fixing bolts with a Torx T30 key. At this point, we can remove the filter from the housing, transfer the upper plate to the replacement and reassemble everything following the reverse procedure.

Posted on 23 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 508 (2010-2018 / MK 1) This guide will show you how to remove and replace the diesel filter on a Peugeot 508 2.0 HDI in simple and quick steps. First, open the bonnet and l…
Peugeot 508 (2018-2026 / MK 2) To replace the important air filter of your second edition Peugeot 508 on your own, you must read the following guide and follow all the steps descri…
Peugeot 508 (2010-2018 / MK 1) Do you want to replace the diesel filter on a Peugeot 508? Let's look at removing all the components. Lift the front bonnet of the car, remove the en…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos