Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump in the Peugeot 508?

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Fuel pump

Replacing the fuel pump in the Peugeot 508 is a very simple and quick operation; let’s see how to proceed in this tutorial. Before doing this, ensure that the key is not inserted for safety. Start by going to the rear of the vehicle, then remove the seat by pulling it outwards. Next, open the large cap on the right side, disconnect both fuel pipes and the power connector, and unscrew the outer ring. At this point, you can extract the pump from the tank, insert the replacement, and reassemble everything in reverse order.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to open the fuel door in the Peugeot 508?
How to open the fuel door in the Peugeot 508?
Peugeot 508 (2010-2018 / MK 1) In this tutorial we can see how to open the fuel door in the Peugeot 508, a very simple operation that is not different from the typical procedure of…
How to Replace the Diesel Filter on a Peugeot 508 2.0 HDI
How to Replace the Diesel Filter on a Peugeot 508 2.0 HDI
Peugeot 508 (2010-2018 / MK 1) This guide will show you how to remove and replace the diesel filter on a Peugeot 508 2.0 HDI in simple and quick steps. First, open the bonnet and l…
Where are the Fuses Located on a Peugeot 508?
Where are the Fuses Located on a Peugeot 508?
Peugeot 508 (2018-2026 / MK 2) The fuses on a Peugeot 508 are housed within dedicated fuse boxes installed in the vehicle. There are two fuse boxes in this type of car. The first i…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos