Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front headlight bulb of the Peugeot 408?

Model: Peugeot 408 T7 - Years: 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

To replace the headlight bulb of the Peugeot 408, you need to open the hood so that you can access the inside of the headlight assembly: here you can locate the inner cover panel that needs to be detached. The bulb inside the headlight assembly can then be disconnected from the corresponding connector, to which the new replacement piece must be connected: after the connection, you can reinsert the bulb into the headlight to verify that everything works correctly.


Posted on 22 January 2025 by ScegliAuto


Related tutorials

How to replace the windscreen on the Peugeot 408?
How to replace the windscreen on the Peugeot 408?
Peugeot 408 (2010-2014 / T7) To replace the windscreen on the Peugeot 408, you need to heat the entire perimeter of the windscreen using a hot air jet: this method will soften th…
How to Set the Time in the Peugeot 408?
How to Set the Time in the Peugeot 408?
Peugeot 408 (2010-2014 / T7) In this tutorial, you will learn how to set the time in the Peugeot 408, a very simple and quick operation to perform, for example, after changing th…
How to Replace the Air Conditioning Compressor on the Peugeot 408
How to Replace the Air Conditioning Compressor on the Peugeot 408
Peugeot 408 (2010-2014 / T7) Below are the instructions that will allow us to remove and replace the air conditioning compressor on the Peugeot 408. First, open the bonnet of the…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos