Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the ECU of the Peugeot 108

Model: Peugeot 108 MK 1 - Years 2014-2021
Part: Control unit

The ECU (or Engine Control Unit) of the Peugeot 108 is a fundamental electronic component that controls various aspects of the engine's operation, including fuel injection, ignition, variable timing, and emissions management. As we can see from the video, it is located inside the engine compartment, at the rear of the engine, behind the fuse box, which in turn is located behind the starter battery. It may be necessary to remove it due to a series of faults that can cause starting difficulties, reduced performance, increased fuel consumption, engine warning lights on, or even the impossibility of starting the engine.

Posted on 9 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Position and function of the air conditioning pressure sensor on the Peugeot 108
Position and function of the air conditioning pressure sensor on the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) The air conditioning pressure sensor, also known as a pressure switch, is a fundamental component in the air conditioning system of our Peugeot 108: …
Where is the OBD port of the Peugeot 108 located?
Where is the OBD port of the Peugeot 108 located?
Peugeot 108 (2014-2021 / MK 1) In the following guide, we will help you find the OBD port inside the cabin of your Peugeot 108 in just a few seconds. First, you need to reach the d…
How to replace the air filter of the Peugeot 108
How to replace the air filter of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) To correctly replace the engine air filter of your Peugeot 108, it only takes a few minutes. All you have to do is carefully read the following guide…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos