Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery replacement for the Peugeot 208 MK2

Model: Peugeot 208 UP, UW, UB, UJ, MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Battery

See other generations:
Video tutorial

To change the battery of the Peugeot 208 that has run out and does not hold subsequent charging attempts, we open the engine hood and unscrew the negative pole clamp, remove it and move it aside. We release the clamp and move it sideways, using the handle then remove the old battery and take the new one with the same characteristics, insert the colored washers that indicate the polarity on the terminals, cover them with copper paste to improve conductivity and place the battery in its seat in the engine compartment.

Insert the positive pole clamp and lock it, insert the negative one and tighten its nut.


Posted on 11 March 2025 by ScegliAuto


Related tutorials

How do you replace the battery of the Peugeot 208 remote control?
How do you replace the battery of the Peugeot 208 remote control?
Peugeot 208 (2019-2026 / UP, UW, UB, UJ, MK 2) In order to replace the battery of the Peugeot 208 remote control, you need to pry with an object in the back of the device: this way, you will be ab…
How to Replace the Battery in a Peugeot 208 1.4 BlueHDI?
How to Replace the Battery in a Peugeot 208 1.4 BlueHDI?
Peugeot 208 (2012-2019 / MK 1, A9) To replace the battery in a Peugeot 208 1.4 BlueHDI, open the bonnet to access the engine bay, as the battery will be located on the right side of th…
How to Change the Key Battery of the Peugeot 208
How to Change the Key Battery of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) This video shows the simple and quick procedure to replace the key battery of the Peugeot 208. The battery is a CR2032. To replace the key battery, u…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos