Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Cabin Air Filter

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter is located just below the windscreen, beneath the plastic cover on the right side. Open the front bonnet and ensure it is securely supported.

Remove the plastic engine cover, the fixing screws of the brake fluid reservoir, the pressure clips of the soundproof cover, and the gasket along the edge. Unscrew the fixing pins of the plastic cover at both ends and remove it along with the protective cover of the cabin air filter container: it is now possible to see the cap of the cabin air filter container and pull it out by the central handle.

Remove the old filter and insert the new one, ensuring the direction of the airflow is respected. Reassemble everything that was previously removed.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

Replacing Cabin Air Filter on Peugeot 308 1.6 HDI
Replacing Cabin Air Filter on Peugeot 308 1.6 HDI
Peugeot 308 (2007-2014 / T7, MK 1) In this video tutorial, you will learn how to change the cabin air filter on the Peugeot 308. The filter is located under the bonnet: open it, and at…
How to Replace the Cabin Air Filter on the Peugeot 308 II
How to Replace the Cabin Air Filter on the Peugeot 308 II
Peugeot 308 (2013-2021 / T9, MK 2) Today, you will learn how to independently replace the cabin air filter on the Peugeot 308 model 2. The cabin air filter is located under the glove c…
How to Remove the Cabin Air Filter on the Peugeot 308
How to Remove the Cabin Air Filter on the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) If you intend to remove the cabin air filter located in your Peugeot 308, follow the few simple steps described in this guide. First, ensure the car …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos