Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Air Filter on the Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Cabin air filter

If you intend to remove the cabin air filter located in your Peugeot 308, follow the few simple steps described in this guide. First, ensure the car is parked safely on a flat surface and completely turned off, then go to the front of the vehicle and lift the bonnet fully. Position the safety support and then shift your attention to the upper area of the engine bay. Finally, remove the protective grille and take out the cabin air filter.

Posted on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Cabin Air Filter on Peugeot 308 1.6 HDI
Replacing Cabin Air Filter on Peugeot 308 1.6 HDI
Peugeot 308 (2007-2014 / T7, MK 1) In this video tutorial, you will learn how to change the cabin air filter on the Peugeot 308. The filter is located under the bonnet: open it, and at…
How to replace the cabin air filter of the Peugeot 308
How to replace the cabin air filter of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Today we will explain how to replace the cabin air filter of the Peugeot 308 model 2, produced from 2013 to 2021 on your own. The cost of the cabin a…
Instructions for Removing the Cabin Air Filter Peugeot 308
Instructions for Removing the Cabin Air Filter Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Today, you will learn how to remove the cabin air filter from a Peugeot 308. First, open the bonnet and use a lever or something thin to remove the f…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos