Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the height of the front headlights of the Peugeot Boxer

Model: Peugeot Boxer MK 2 - Years 2006-2024
Part: Checks and maintenance

In this short and simple guide, we will see how to adjust the height of the front headlight of the Peugeot Boxer, but also of the Fiat Ducato, following the instructions below. First of all, we open the vehicle's engine hood, positioning ourselves in front of a fixed reference; then we adjust the height of the front headlight through the screw found on the top part of the headlight, as shown in the video. At this point, we verify that the height of both optical groups are at the same level, then we make the manual adjustment from the cabin, following the video tutorial until the end!

Posted on 8 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front headlight of the Peugeot Boxer 2018
How to disassemble the front headlight of the Peugeot Boxer 2018
Peugeot Boxer (2006-2024 / MK 2) If one of the two front headlights of your Peugeot Boxer second series (year 2018) has stopped working or is damaged and you want to remove it yourse…
How to Remove the Starter Motor on a Peugeot Boxer
How to Remove the Starter Motor on a Peugeot Boxer
Peugeot Boxer (2006-2024 / MK 2) Want to remove the starter motor from the Peugeot Boxer? Here’s how to do it from inside the engine compartment. Disconnect the battery terminals loc…
How to Replace the Front Headlamp Bulb on the Peugeot Boxer 2015
How to Replace the Front Headlamp Bulb on the Peugeot Boxer 2015
Peugeot Boxer (2006-2024 / MK 2) If you own a Peugeot Boxer second series (2015) and want to learn how to replace the front headlamp bulb, just carefully read the instructions below …

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos