|
Do it yourself
| |||
| ||||
How to change the battery of the Peugeot 308 MK1.
Model: Peugeot 308
T7, MK 1
- Years 2007-2014
Let's see how to change the battery of the Peugeot 308 MK1: open the hood, and the battery is located on the right side, but first, we need to remove the plate from the air intake, then we will take off the protective plate and the air duct. Now we can disconnect the positive terminal, then remove the cover with the maxi fuses that are connected to this terminal. Now we need to remove the battery cover by pulling it upwards. Using a 10mm socket wrench, we remove the battery securing plate; then we disconnect the negative terminal of the battery. We scratch the inside of the terminals with fine sandpaper to remove the layer of oxidation, then we apply some copper grease on the terminals of the new battery to improve contact, install the new battery, and secure the plate, then connect the negative terminal. We put the cover back in place and then reattach the plate with the maxi fuses and reconnect the positive terminal. Now we also put the protective plate and the air duct back in place, and we are done.
Posted on 7 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Peugeot 308
(2007-2014 /
T7, MK 1)
Need to change the battery on a Peugeot 308? Remove the battery if it is damaged. Open the car door and pull up the lever to open the engine compartm…
Peugeot 308
(2007-2014 /
T7, MK 1)
Want to change the battery in your Peugeot key? Let’s see how to change the key battery on a Peugeot 308. Take your remote key and, using a screwdriv…
Peugeot 308
(2007-2014 /
T7, MK 1)
This brief guide will show us how to disassemble and replace the battery of the engine of the Peugeot 308 1.6 HDI. First of all, we open the hood of …
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.678
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |