Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable Eco Mode in the Peugeot Partner?

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

The Eco mode mentioned is activated automatically due to the need detected by the control unit to save energy and conserve the 12-volt battery that powers the vehicle, in this case, the Peugeot Partner. In short, it will not be possible to use certain equipment considered less essential, such as the air conditioning, radio, and so on. However, it is possible to manually disable this setting by simply pressing the button marked with the Eco label or featuring a leaf symbol, located on the dashboard.

That’s it; no further action is required.


Posted on 8 February 2026 by ScegliAuto


Related tutorials

Where is the Airbag Module on the Peugeot Partner Tepee?
Where is the Airbag Module on the Peugeot Partner Tepee?
Peugeot Partner Tepee (2008-2018 / B9) Disconnecting the airbag module of a vehicle means completely disabling the system. This operation is usually performed when removing the steering wh…
How to Remove the Door Panel of a Peugeot Partner
How to Remove the Door Panel of a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Before you start, open the front door of your Peugeot Partner. Begin by disengaging and removing the main insert of the door panel, using a thin but …
Where is the OBD Port on a 2015 Peugeot Partner?
Where is the OBD Port on a 2015 Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To find the OBD port inside your Peugeot Partner, it only takes a few seconds. All you need to do is carefully read the following guide and follow th…

Other guides you may be interested in

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - Where is the Peugeot Partner jack located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos