Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Thermostat on a Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Thermostat

See other generations:
Video tutorial

Before you can start, open the bonnet of your Peugeot Partner. Begin by removing the air filter housing, unscrewing the screws that secure it and disconnecting the associated hoses.

This will give you access to the thermostat. Next, disconnect the pipes connected to it. At this point, unscrew and remove the bolts that secure the thermostat to the right side of the engine block.

Once you have completed this step, you can remove the thermostat, successfully finishing the disassembly. To fit the new thermostat and reassemble the air filter housing, simply reverse this procedure, and you will have completed the replacement.


Updated on 7 April 2026 by ScegliAuto


Related tutorials

Replacing Thermostat on Peugeot Partner
Replacing Thermostat on Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) How do you replace the thermostat on a Peugeot Partner? Let's look at removing the part located in the engine bay. First, lift the front bonnet and s…
Replacement of the thermostat for the Peugeot Partner Tepee 1.6 HDi
Replacement of the thermostat for the Peugeot Partner Tepee 1.6 HDi
Peugeot Partner Tepee (1996-2013 / MK 1) In this guide, we will see the instructions that will allow us to disassemble and replace the thermostat of the engine cooling circuit of the Peugeot…
Main Components of the Fuse Diagram for the Peugeot Partner Tepee 1.6
Peugeot Partner Tepee (2008-2018 / B9) In this video, you will see the main components of the fuse diagram for the Peugeot Partner Tepee 1.6. First, open the bonnet and locate the fuse box…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos