Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Instrument Cluster from a Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Instrument cluster

In today's tutorial, learn how to remove the instrument cluster from a first-generation Peugeot 308. First, disconnect the two battery terminals; then, enter the car and use a sharp object to lever out the instrument cluster as shown in the video. At this point, disconnect the electrical connector at the rear and remove the cluster completely. Refit it by applying the reverse procedure: reconnect the connector and insert the cluster until it clicks into place.

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Peugeot 308
How to Reset the "Service" Light on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Before you start, sit in the driver's seat of your Peugeot 308. Press and hold the button located in the bottom right corner of the instrument panel,…
Removing the Instrument Cluster from the Peugeot 308 MK1
Removing the Instrument Cluster from the Peugeot 308 MK1
Peugeot 308 (2007-2014 / T7, MK 1) In today's tutorial, you will learn how to remove the instrument cluster from the Peugeot 308 MK1 by following the instructions below. First, get ins…
How to reset the service light on the Peugeot 308
How to reset the service light on the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) If the orange service light continues to illuminate on the instrument panel of your Peugeot 308 second series (2013-2021), do not worry because you c…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos